SOLIDWORKS Simulacije
SolidWorks Simulacija omogućava korisnicima da na svojim postojećim delovima i sklopovima definišu odnose između elemenata, postave spoljašnja opterećenja, startuju simulaciju i pogledaju izveštaje iz kojih mogu da sagledaju naponsko stanje, deformacije, relativne deformacije, distribuciju stepena sigurnosti.
Rezultati dobijeni kao rezultat post-procesa u SolidWorks simulaciji zasnivaju se na proračunima metodom konačnih elementa(MKE). Obuka je namenjena početnicima i naprednim korisnicima. Ne morate da budete ekspert u ovoj oblasti da bi ste pohađali kurs. Pozivamo vas da se prijavite kako bi ste postali ekspert.
plan i program obuke
1. The Analysis Process
The Analysis Process
Case Study: Stress in a Plate
Project Description
SolidWorks Simulation Options
Preprocessing
Meshing
Postprocessing
Multiple Studies
Reports
2. Mesh Controls, Stress Concentrations and Boundary Conditions
Mesh Control
Case Study: The L Bracket
Project Description
Case Study: Analysis of Bracket with a Fillet
Case Study: Analysis of a Welded Bracket
Understanding the Effect of Boundary Conditions
3. Assembly Analysis with Contacts
Contact Analysis
Case Study: Pliers with Global Contact
Pliers with Local Contact
4. Symmetrical and Free Self-Equilibrated Assemblies
Shrink Fit Parts
Case Study: Shrink Fit
Project Description
Analysis with Soft Springs
5. Assembly Analysis with Connectors and Mesh Refinement
Connecting Components
Connectors
Mesh Control in an Assembly
Case Study: Cardan Joint
Problem Statement
Part 1: Draft Quality Coarse Mesh Analysis
Part 2: High Quality Mesh Analysis
6. Compatible/Incompatible Meshes
Compatible / Incompatible Meshing
Case Study: Rotor
7. Analysis of Thin Components
Thin Components
Case Study: Pulley
Part 1: Mesh with Solid Elements
Part 2: Refined Solid Mesh
Solid vs. Shell
Creating Shell Elements
Part 3: Shell Elements - Mid-plane Surface
Results Comparison
Case Study: Joist Hanger
8. Mixed Meshing Shells & Solids
Mixed Meshing Solids and Shells
Case Study: Pressure Vessel
9. Mixed Meshing Solids, Beams & Shells
Mixed Meshing
Case Study: Particle Separator
Beam imprint
10. Submodeling
Sub-modeling Basics
Case Study: Scaffolding
Part 1: Parent Study
Part 2: Child Study
11. Design Study
Case Study: Suspension Design
Part 1: Multiple Load Cases
Part 2: Geometry Modification
12. Thermal Stress Analysis
Thermal Stress Analysis
Case Study: Bimetallic Strip
Examining Results in Local Coordinate Systems
Saving Model in its Deformed Shape
13. Adaptive Meshing
Adaptive Meshing
Case Study: Support Bracket
h-Adaptivity Study
p-Adaptivity Study
h vs. p Elements - Summary
14. Large Displacement Analysis
Small vs. Large Displacement Analysis
Case Study: Clamp
Part 1: Small Displacement Linear Analysis
Part 2: Large Displacement Nonlinear Analysis
Kako da počnete sa obukom?
Prouči materijal
Pre nego što odabereš kurs, sagledaj širu sliku o tome da li želiš da postaneš student 3D Akademije
Treba ti posao
Vidi kome su potrebne veštine i znanja koja ćete steći u Solfins 3D Akademiji
Rezerviši mesto za obuku
Dovoljno ste se informisali i sada vas zanima prvi naredni termin i cena?